A&A Plumbing – Omaha Plumbers – Commercial Plumbing – residential plumbing – omaha water heater installation

Author: Luke Direct Marketing

How to Find a Plumbing Water Leak

By / Uncategorized / Comments Off on How to Find a Plumbing Water Leak

If you find or suspect a water leak in your home, tracing it to the source quickly is necessary to avoid potential water damage that can get very costly to repair. Identifying the leak’s source depends largely on the type of leak happening. A leaking pipe under the sink is far easier to identify than to find one that is hidden within a wall or in the ceilings.

Check the Water Meter

One of the easiest ways to tell if your home has a water leak is to check the water meter. Go to the water meter, typically located near the main water shut-off of your home. Note exactly where the water meter reads and write it down or take a photo of it with your phone. Confirm that you have a water leak by shutting off your water-using appliances and fixtures. This includes faucets, showers, washing machines and refrigerators. Check back in a few hours, just make sure all the water stayed off. If the reading has advanced, this indicates a leak somewhere in your plumbing system.

Large Appliances

Wherever possible, carefully move appliances to look for the source of the moisture. For example, a loose or damaged water line to a dishwasher will leak water under and around the appliance.

Kitchen & Bathrooms

Open all cabinets under your sinks and clear out supplies and other products so you can more easily examine the space for water, dampness, stains, mold or mildew, and buckled or peeling material. Shine a bright light inside to look for moisture around all the joints and at the bottom of the P trap. Signs of a leaking pipe may also include corrosion on the supply lines, and pipe fittings and valves. If possible, tighten fittings and wipe away any moisture present.

Turn your water back on to see if you still have a water leak problem. Sometimes the leak is in the supply valve or line, and it will be evident when the supply is turned off and then activated again. If this is the problem, have the leaking supply line replaced.

Like any plumbing problem, attending to it quickly can save you a lot of money in repairs. If your house is more than 20 years old, your plumbing system may require a professional inspection.

Floors, Walls & Ceilings

Water leaks can be tricky to find. Try these tips to look for any that may be inside walls, above ceilings, or on the floor:

  • Examine the flooring around fixtures and appliances that use water, including toilets, bathtubs, dishwashers, and refrigerators. Cracked or warped flooring or soft, “spongy” spots in the floor most likely mean moisture is present and a possible leak.
  • Check the ceilings throughout your home. Stains on the ceiling indicate a leak somewhere coming from above.
  • Also examine the walls in your home for water damage, such as bubbled paint, stains and cracks. Leaking water pipes may also leave wet spots on the wall. But the location of this damage is not usually the exact location of the leak. Water may run the length of a broken pipe and pool at a different location in the wall.

Contact us to inspect for, confirm, and repair the leak BEFORE you begin ripping out walls or floors.

Basements & Crawlspaces

Inspect all the exposed pipes you can see in your basement and crawlspaces. Moisture and/or corrosion around the pipes are an easy indicator you have a leak.

If you discover rotted wood, mildew around these pipes, your leak is most likely in this area. Water will travel downward because of gravity, and occasionally the location of water stains is not the exact location of a leaking water pipe. Still, it is a good indicator of the general area of the source of moisture.

Checking Outside the Home

Walk the circumference of your home and check hoses, spigots, and (if you have one) the irrigation system. Just a tiny pinhole leak can account for losing and wasting over 6,300 gallons of water a month.

Call A Trusted, Trained Plumbing Professional

If you have any plumbing problems or concerns at all, give us a call today at (402) 932-3899 or visit our website at anaplumbing.com. Since 2009, A & A Plumbing & Drain Services is the leading plumber serving Douglas and Sarpy counties and surrounding areas. We offer commercial and residential plumbing services, drain cleaning, water heaters, and much more.

Keeping Tree Roots from Damaging Your Sewer Line

By / Uncategorized / Comments Off on Keeping Tree Roots from Damaging Your Sewer Line

There are many benefits of having trees in your yard, including adding value to your home; breaking the cold winter winds to lower your heating costs; and providing food and shelter for wildlife.

Unfortunately, a poorly placed and planted tree can be a hazard to your sewer line.

The roots of trees and shrubs naturally grow toward sewer lines. The sewer pipes can be a bountiful source of water, oxygen, and nutrients that they crave. When a root discovers a sewer line leak, it will rapidly grow and expand into the pipe – and can slow the flow of waste, cause blockages, damage pipes, and other serious problems.

Sewage leaks are unsanitary and have been shown to cause health problems. Repairing the sewer line damage caused by tree roots can be very costly, sometimes thousands of dollars!

The professionals at A & A Plumbing & Drain Services offer the following tips to help you avoid costly repair bills by taking a few steps when planting trees and maintaining your home’s pipes.

 

  • Choose Only “Sewer-Safe” Shrubs & Trees

When planning out your landscaping, educating yourself is the best way to avoid future problems and potentially expensive repair bills. First, limit the number of plants you place near the sewer lines. If you are planning to plant larger trees, be sure they are far enough away from sewer lines so that, as they mature, roots are not within reach of the pipes. If you believe you want a tree closer to a sewer line, select slow-growing trees with a smaller mature root impact area.

 

  • Be Aware of the Warning Signs

In plumbing, there is one thing you can eventually rely on – clogged drain lines. For infrequent clogs, there are often simple solutions to clear a drain that most homeowners may try. But if your drains clog frequently or completely, it could be a sign of a larger problem. Root damage to sewer lines can lead to slow-flowing, clogged, or even overflowing drains – sometimes accompanied by a gurgling noise from the toilet.

 

  • Having an Inspection and Maintenance

When drains clog frequently, are difficult to clear, and emit gurgling noises, call A & A Plumbing & Drain Services to have the drain and sewer lines inspected. We can inspect your drain pipes by running a camera probe through them to look for damage or issues and can (if necessary) recommend repairs or replacement.

 

To avoid major sewer repairs, we can clean your sewer lines regularly and inspect the structure of the pipe system. Regular maintenance will help prevent root growth inside the pipes. Sewer-line maintenance involves us threading a cable through the sewer pipe that cuts through any clogs or tree roots, clearing the sewer pipe so the sewage can flow freely out of and away from your home.

With more than 20 years of experience, we have been serving first-class residential and commercial plumbing throughout the Omaha metro area. We believe our customers deserve service that is reliable, responsive, and complete, with GUARANTEED satisfaction. If you have any plumbing questions or concerns, call your friends at A & A Plumbing & Drain Services at 402-932-3899 or visit our website www.anaplumbing.com